Pike yawner: talîmatên gav-bi-gav ji bo hilberîna xweser

Every angler knows that very often a predatory fish swallows the bait along with the hook very deeply. It will be possible to remove them with bare hands, but injuries cannot be avoided, it is in such cases that a yawner will come to the rescue, for a pike this thing is simply irreplaceable.

Çawa bikar bînin

Using a yawner is simple, the main thing is to do everything strictly in turn. To get the hook out of the mouth of a pike, you need:

• take a yawner folded;
• bring the ends into the mouth;
• release the spring.

Then, using a lancet or extractor, the hook is taken out of the mouth and the yawn is taken out.

Taybetmendiyên cîhazê

Everyone will need a yawner, it is just as necessary as an extractor. Such a device is intended so that the fish, pike in particular, cannot close their mouths and thereby simplify access to the swallowed hook. But it often happens that the size of the available tool is either large or too small.

That is why there should be several gapers in the arsenal, and each of them should have its own size. The ideal option would be to have at least three different gapers.

This product is very important for lovers of sports fishing, they value every moment when they are caught. Spinning players without a yawner are also nowhere, but they don’t need a large number of extra things.

The choice of material for self-production

Many masters make yawners at home in the required quantities and the right size. It is not difficult to do it yourself, but certain skills must still be.

In addition to the ability to bend metal, it is important to choose the right material from which the product will be made. For a yawner, they usually take a spoke from a bicycle or a steel wire of the required diameter. The main thing is that the selected material does not break and bend when used.

Additionally, for convenience, you can put a rubber or silicone tube on the place where your hands will be located when using the tool. In winter, this addition will prevent the skin of the hands from touching the cold metal.

Hilberîna bi destên xwe

For production, you must first stock up on the necessary materials. There are not many of them, many have everything in the garage or workshop. Everything you need can be represented in the form of a small table:

The manufacturing process is simple, everyone can handle it. You can make a yawner with your own hands like this:

• with the help of pliers on the knitting needle, an incomplete coil is made exactly in the middle;
• at the front ends, they bite off everything superfluous and bend it at 90 degrees;
• the ends are processed with a file so that there are no burrs, this will prevent injury to the fish and the fisherman;
• on the bent ends, you can put on a piece of rubber tube;
• a straightened paper clip fixes the product, this will facilitate its transportation.

This completes the process of making a yawner for pike with your own hands.

The ends can not be covered with a rubber tube and not bent at a right angle, you can wrap them in the form of a spring. In this case, you do not need to put on the tube.

Pêdiviyên Hilberê

The design of the yawn can be any, just above the simplest manufacturing method was described. In this mechanism, the main role is played by a tight spring and the strength of the product along the entire length. It depends on their quality how long and wide the mouth of the predator will be opened when the hook is pulled out.

Is it worth making your own?

Independent production of a yawner should be carried out by someone who has similar skills in working with metal. If you are new to this, then it is better to buy a product in a store.

Their cost is not high, and the hassle is many times less. But it is worth remembering that a plastic yawn will have less weight, however, in the cold this material is very fragile. And you can’t use it for a large pike, a toothy one can break it. Most often, purchased options are chosen from metal, it can be modified independently at home if desired.

You can make a pike yawner with your own hands without any problems, the main thing is that the necessary materials and very little time are available. Each spinning angler should have such a product in his arsenal, and preferably more than one, but it will be purchased or home-made, everyone decides for himself.